Product Overview

Note -  We have a quantity of Fireberd 6000A's onhand.  The price shown on this listing is for selected newer vintage units.  Note - there is no functional difference between newer and older vintage units.  If price is the primary consideration, please consider one of our selected older vintage 6000A's. Test ATM, frame relay, ISDN, low-speed data, T1, 2M, T3, and 34M with the same instrument, and recall up to ten of your most frequently used test setups with the push of a button. Detect hard-to-find bit error rate (BER) problems quickly, and interpret test results easily using custom printouts showing only the results that you specify. Reduce response time and extend the reach of your field technician with remote testing. DTM32 and Remote Test Manager (RTM) software options enable you to perform remote testing from your PC or UNIX workstation. Use the FIREBERD 6000 to test analog circuits. The TIMS-45 Lid enables you to perform VF and wideband Transmission Impairment Measurement Set (TIMS) tests on analog and digital transmission lines. Automate routine testing on your FIREBERD 6000 with the Dynamic Script Generator Option and free LabVIEW drivers. In-service monitoring - Monitor live data at various access locations, from resistor-isolated DSX monitor points to a bridge on a four-wire access point, without disturbing revenue-generating traffic. Ideal for routine maintenance, the FIREBERD 6000 offers a variety of in-service measurements, including bipolar violations, timing and level analysis, frame errors, and CRC errors. End-to-end testing - Quickly isolate any problem to a specific direction by analyzing the performance of an entire digital link in both directions. Full-duplex end-to-end testing also serves as an excellent analysis of all of the circuits and equipment within your network. Out-of-service testing - Perform precise analysis of your circuits and equipment by removing live traffic from the digital link. The FIREBERD 6000 offers a variety of bit error results and statistics for the most accurate measurement of circuit performance by any test instrument. The FIREBERD 6000 can generate an array of stress patterns, frame relay frames, and ATM test cells to ensure that your circuits and equipment are operating within the limits of applicable standards and to verify an acceptable Quality of Service (QoS) for your circuit. Loopback testing - Enjoy the convenience of using a single FIREBERD 6000 to perform out-of-service testing. Loopback testing is ideal as a quick check of circuit performance or when isolating faulty equipment. The FIREBERD 6000 supports all standard T1, DDS, and data communications loopbacks. Portable WAN analyzer with automated and remote testing. Easy-to-use, menu-driven user interface Test ATM, frame relay, ISDN, T1, and more. Detect hard-to-find BER problems quickly Fast packet testing. ISDN testing. T- and E-carrier testing. DTE/DCE datacomm testing.