|
You can use the 80340A as a standard power sensor with either the 8540 series power meters, or the 8003 scalar network analyzer. Additionally the 80340A is triggerable which lets you display the response from a pulsed source. You can choose between two modes of operation ¿ measure with either a pulsed fixed frequency (CW mode), or with a pulsed swept frequency (start/stop mode) signal from a sweeper. The sensors can also be used to display the response of devices with no pulse modulation on the signal generator.
|
Frequency Range/ Power Range |
Maximum Power |
Power Linearity 3 (Frequency > 8 GHz) |
RF Connector |
Length |
Diameter |
Weight |
VSWR |
|
50 MHz to 18 GHz |
+23 dBm (200 mW) |
±0.13 db, 0 dBm to -30 dBm |
Type N(m) |
14.6 cm |
3.7 cm |
0.3 kg |
1.12: 0.5 - 2 GHz |
|
-20 to +20 dBm (Triggered) |
|
±0.13 dB, ±0.01 dB dB/dB |
|
(5.75 in) |
(1.44 in) |
(0.7 lbs) |
1.22: 2 - 12.4 GHz |
|
-30 to +20 dBm (Free Run) |
|
from 0 dBm to +20 dBm |
|
|
|
|
|
| 
