|
Unit has positioned on top 1/4" Phone Jacks for Transmit Port B, A, and Dial. It has Dip Switch Setting for Address, & Modem, GPIC/IEEE488 Connector, Modem/DCE and Peripheral/DTE 25-Pin Female Connectors.
Provided Inputs are for Sequencer, Functions, Modes, Entry, and an area for output codes via LED.
FEATURES
- Test Execution / Frequency Step/IM Check
- Display Check
- Data Recall
- Impedance 900 Ohm Selector
- Bridge Receiver (Terminal)
- Receive port A / Transmit Port B (Dial & Hold)
- Port Swap Button
| 
