|
The Tektronix YBT250 Field Transmitter & Interface Tester is an RF tester optimized for field testing cellular basestations. The YBT250 is a modular test instruement based on the NetTek Analyzer Platform. The standard YBT250 actually consists of two parts, the instrument module and the NetTek Analyzer Platform. The Instrument module contains the hardware and software needed to perform RF analysis.
The NetTek Analyzer Platform is the "computer" that runs the software in the instrument module.
You can attach up to three additional instrument modules onto the NetTek Analyzer Platform to expand the instrument's test capabilites. Instrument modules communicate with the platform through the internal bus and to the Base Station or device under test through their own input and output connectors.
The NetTek Analzer Platform is based on the Windows CE operating system.
Y350C Options included:
-
Option 88 - Modular Installed; System Configuration
-
Option FD - 3.5" Floppy Disk Drive
-
Option ST - Software Install; Preload YBT1 Driver Software
YBT250 Options included:
-
Option 88 - NetTek Analyzer Platform
-
Option CD1 - Demodulation measurements for cdmaOne standard
-
Option CD2 - Demodulation measurements for cdma2000 standard
-
Option CR1 - RF measurements for cdmaOne/cdma2000 standard
-
Option YBT1 - T1 Circuit Tester
| 
