Product Overview

The 1710 LCR Digibridge is an economical, user friendly, general purpose meter for production testing of inductors, capacitors and other LCR components. The 1710 Digibridge makes primary measurements of L, C, and R and secondary measurements of D and Q.  L, C, & R measurements are made at a frequency of 120Hz or 1kHz with a basic accuracy of ±0.2%. The accuracy of the secondary parameters for D or Q <1, is ±0.001 for Q (with R), ±0.01 for Q (with L), and ±0.0005 for D (with C). Refer to the Specifications list for the accuracy of D and Q when D or Q > 1. Bias Voltage can be applied to capacitors by connection of an external voltage source on the rear panel. Bias levels from 0V to 60VDC are attainable. The test voltage level is programmable at 0.25V or 1.0V RMS.  An internal zeroing function is provided and selectable from the front panel. Auto/Manual ranging is selectable for the five measurement ranges. Connection to the device under test (DUT) is through 4 BNC terminals on the front panel of the 1710 Digibridge unit. USES: ¿ Meters Used for Impedance Measurements (Inductance, Capacitance, and Resistance) to Characterize the Performance of a Variety of Electrical Components and Materials. ¿ Test Resistors, Capacitors, Inductors or Any Type of Passive Component ¿ Testing Electronic Components FEATURES: Easy to Use Basic LCR Accuracy of 0.2% Large LED Display Measurement Autoranging or Manual Hold  Guarded Four-Terminal Kelvin Connections to Maintain Measurement Integrity  Cost Effective Solution LCR Testing  Range from 0.0001Ù to 99.999MÙ at 120 Hz  Range from 0.0001Ù to 9.9999MÙ at 1kHz